Eppendorf 5402 Manual Updated -

Because the 5402 is refrigerated, ice can accumulate inside the chamber. Leave the centrifuge lid open when the power is turned off to let the ice melt. Wipe away the condensation pool completely before restarting the unit. Rotor Care

The Eppendorf 5402 is a versatile pipette designed for a wide range of laboratory applications. Some of its key features include: eppendorf 5402 manual updated

Visit the official Eppendorf website and navigate to their "Support" or "Literature" sections. Search for legacy documentation or archived operating manuals. Because the 5402 is refrigerated, ice can accumulate

| Issue / Error Code | Potential Cause | Recommended Solution | | :--- | :--- | :--- | | : Rotor shuts down around 6000 rpm | Rotor imbalance or over-speed detection system | 1. Check rotor is properly seated. 2. Ensure centrifuge is on a level surface. 3. Re-balance rotor load precisely. | | Error Code "A" | General error; cause unknown without service manual. | Consult the official service manual or contact Eppendorf support. | | "balan." error when exceeding 700 rpm | Severe imbalance. | Check that all centrifuge feet are present and undamaged. Re-balance load precisely. | | Instrument not starting | Lid not properly locked. | Open and re-close the lid firmly, ensuring it clicks into place. | | Unit does not power on | Power connection or fuse issue. | Check power cord and outlet. Replace the fuse as instructed in the manual. | | Excessive noise/vibration during operation | Unbalanced load or damaged rotor component. | Stop the run immediately. Rebalance the load or inspect for rotor damage. | Rotor Care The Eppendorf 5402 is a versatile

Modern lab safety regulations require quick access to equipment instructions for all lab personnel.