Digi Sm-500 Scale User Manual

This function counts identical small parts (e.g., screws, pills, beads) based on a sample weight.

Typically configured for dual-range capacities (e.g., 6 kg/15 kg or 15 lb/30 lb) to maintain accuracy at lower weights. 2. Unboxing and Initial Hardware Setup digi sm-500 scale user manual

If you experience hardware failure (cracked LCD, no response after battery change, persistent “ERR” codes), contact Digi authorized service centers. Have the following ready: This function counts identical small parts (e

| Error Code / Issue | Probable Cause | Solution | | :--- | :--- | :--- | | | Wind, vibration, or unstable surface. | Move scale away from drafts; ensure table is stable. | | ---- or Over | Weight exceeds capacity. | Remove weight immediately to prevent damage. | | Error P | Printer error (Paper jam or out of paper). | Open printer, reload paper, clear jam, and close cover. | | Error E | Memory error or overload. | Turn scale off, unplug for 30 seconds, and restart. | | Labels misaligned | Sensor issue or paper loaded incorrectly. | Reload labels ensuring the gap sensor aligns with the label gap. | | Zero Error | Scale was turned on with weight on platter. | Remove weight and press ZERO . | Unboxing and Initial Hardware Setup If you experience