Press the foot pedal to wind. Once full, slide the spindle back to the left, cut the thread, and push the handwheel back in. 2. Threading the Lower Bobbin Case Open the shuttle race cover behind the extension table. Remove the metal bobbin case by pulling its latch.
The upper and lower threads should lock together exactly in the center of the fabric layers. victoria fz 7910 sewing machine instruction manualrar
: For replacement parts like bobbins, zipper feet, or zig-zag feet, retailers like Sewing Parts UK offer specific kits tailored for the 7910. Quick Start: Basic Threading & Setup Press the foot pedal to wind
Upper thread tension is too loose or machine is misthreaded. Threading the Lower Bobbin Case Open the shuttle
: Uses standard shuttle and riller mechanisms, and is compatible with various clip-on feet like walking, ruffler, and zipper feet. How to Access the Manual
: Place the thread spool on the rear right pin, guide it through the tension disks, then up through the take-up lever and down to the needle.
Direct paths for the thread through the tension discs, take-up lever, and down to the needle eye.