Caraflo V200 Shower Instructions Upd Jun 2026

Shut off the main water valve to the holiday home and open the lowest taps to bleed remaining pressure from the lines.

To use the Caraflo V200 shower, follow these steps: caraflo v200 shower instructions

| Parameter | Specification | | :--- | :--- | | | 10 bar | | Flow Pressure (Hot & Cold) | 0.5 - 5 bar | | Max Mixed Water Temperature | 46°C | | Recommended Max Shower Temp | 41°C | | Hot Supply Temperature | 55 - 65°C | | Cold Supply Temperature | ≤ 25°C | Shut off the main water valve to the

Note : The recommended usage pattern for caravans is: “wet all over, turn off while soaping, then turn back on to rinse”. When you turn the flow back on, you may get a short burst of cold water before the thermostatic valve recovers to your set temperature. This is normal for thermostatic mixers and usually lasts only a few seconds. This is normal for thermostatic mixers and usually

Unscrew the flexible shower hose from the bottom outlet of the V200 valve body. Shake any remaining water out of the hose and the shower head handset, and store them flat on the shower tray floor.

This valve can be installed either horizontally or vertically , allowing for flexible placement in various shower pod designs.