Bst900w Manual __full__

By long-pressing the button for 10 seconds, you can change the startup behaviors of the microcontroller:

Check with a multimeter that your power source provides at least 8V DC at the terminal blocks, and double-check that IN+ and IN- are wired correctly. The module shuts down or resets under heavy loads bst900w manual

If the exact is impossible to find, you can safely use a manual from a functionally identical 900W inverter/charger . Look for these keywords in an alternative manual: By long-pressing the button for 10 seconds, you

Ensure the "IN+" and "IN-" terminals are connected correctly to your power source. Reversing polarity will blow the fuse or damage the board. bst900w manual