: Configure resolution, frame rate, bitrate, and compression (H.264 or H.265). Higher settings improve quality but consume more bandwidth and storage. A common starting point for 4MP cameras: 2688×1520 resolution, 15 fps, H.265, variable bitrate.
After running the cables, crimp RJ45 connectors onto each end. Use the T568B wiring standard (most common). Then test each cable with a continuity tester to ensure all eight pins are connected and there are no shorts or split pairs. A failed cable test at this stage saves hours of troubleshooting later. network camera networkcamera install
Step-by-step guidance on ?