Robopac Robot 2001 Manuale Work //top\\ 🎯 Official

Position the robot at the corner of the pallet, ensuring sufficient space around the pallet for the machine to move. Threading the Film:

Use the interface to set the number of top and bottom wraps—usually two of each for standard stability. Initiation:

The machine will automatically wrap the pallet and stop when finished. 3. Maintenance and Safety (Manutenzione e Sicurezza)

| Problem | Probable cause | Action | |---------|---------------|--------| | Film breaks | Pre-stretch too high / rough load | Reduce pre-stretch; check load edges | | Ring stops mid-cycle | Photocell blocked or load too tall | Clean sensors; adjust max height setting | | Film not cut | Hot wire cold / blade dull | Check heater relay; replace blade | | Film loose at bottom | Bottom wraps insufficient | Increase bottom wraps (e.g., 4 → 6) | | Load unstable | Wrap force too low | Increase pre-stretch or overlap |

: Managed through an adjustable electromagnetic braking assembly, giving handlers control over the holding force exerted against the cargo. Safety Protocols & Preventive Maintenance Essential Safety Rules