Sc673-10 — Ricoh Error

: If the error persists after a restart, a technician may need to clear the SC code in Service Program (SP) mode: Enter SP mode (typically Reset + 107 + Clear/Stop Navigate to System SP > 5810 (SC Reset) and execute the reset, then restart the machine. Hardware Check : If firmware does not resolve the issue, inspect the USB or communication cables

Does the error pop up when turning on the machine, or only after it sits idle? sc673-10 ricoh error

error on Ricoh devices is a communication error between the Smart Operation Panel Controller : If the error persists after a restart,

Wait to let the electrical components discharge fully. Plug the machine back in and turn it on. 2. Check the SP Parameter Setting Plug the machine back in and turn it on

Verify that the power supply unit (PSU) is outputting stable voltage to the controller.