Xtra Safe Kt 82001 Manual Jun 2026

| LED Status | Error Description | Manual Solution (Page 22-24) | | :--- | :--- | :--- | | | Overvoltage (>30V DC) | Reduce voltage immediately. Unit may be damaged. | | "In 1" flashing red | Channel 1 stuck closed | Replace the E-stop button or safety switch. | | "In 2" off, "In 1" on | Mismatched input timing | Inputs must change state within 0.5 seconds of each other. Check wiring symmetry. | | "Out" flashing yellow | Feedback loop broken | Check the auxiliary contacts on your external contactors. | | All LEDs cycle | Internal watchdog fault | Cycle power. If persists, replace the unit (internal CPU error). |

: With the door open , hold the * button, enter your new 4-digit code, and press # . Xtra Safe Kt 82001 Manual

Ensure the batteries are properly seated and have adequate power, as weak batteries can cause the motor to lock up or operate slowly. | LED Status | Error Description | Manual

Safety Gear Pros Reading time: 4 minutes | | "In 2" off, "In 1" on

Key features include:

Change the default passcode immediately to secure your savings. .

: Align the four dials to the current code (or 0000) with the center line. Release the Door