Configures the unit to accept bills in one, two, or all four orientations.
Turn off power or ensure the host machine is ready for ticket servicing. jcm gen 5 manual
The primary communication and power port utilizes a standard 14-pin Molex connector. Below is the standard pinout mapping: Pin Number Description Main Power Input Pin 2 Main Power Input Pin 3 Power Ground Pin 4 Power Ground Pin 5 Signal Ground Communication Reference Pin 6 TxD / Netplex Tx Transmit Data to Host Pin 7 RxD / Netplex Rx Receive Data from Host Pin 8 Kiosk/Machine Wake Signal Pin 9 Hardware Reset Input Pin 10 External Bezel Lighting Control Pin 11 USB Data Positive Pin 12 USB Data Negative Pin 13 Factory Configuration Use Pin 14 Chassis Ground Frame Earth Ground 3. DIP Switch Configurations Configures the unit to accept bills in one,
: Requires a 24V DC power supply. It supports both USB and RS232 communication protocols. Below is the standard pinout mapping: Pin Number
Day 231: We hit the membrane. The planet has a shell. Not rock. Chitin. Something is gestating inside. Command says ignore. Command says proceed. The JCM Gen 5 doesn't drill. It cuts.
Condition : Interlock circuit detects that the print head cover is unlatched.
Step 1: Power down -> Step 2: Unlatch print head -> Step 3: Run cleaning card -> Step 4: Wipe ticket paths