Anthos A7 Service Manual 2021 -

Air drops to 5.0 bar for system operation; water drops to 2.5 bar.

The unit features remote assistance, allowing technicians to perform smart monitoring and remote troubleshooting via the Anthos Connect portal. anthos a7 service manual 2021

Disclaimer: This overview is intended for educational and reference purposes. All mechanical, electrical, and hydraulic adjustments on medical devices must be performed exclusively by factory-trained, authorized biomedical service technicians using genuine manufacturer parts. Air drops to 5

Manually trip each switch during an active motorized movement. Anthos A7 Classe Plus service and technical manuals

Specialized automated systems (e.g., W.H.E., V.I.P.) designed to maintain waterlines and prevent cross-contamination.

Anthos A7 Classe Plus service and technical manuals provide comprehensive instructions for the installation, maintenance, and repair of these dental units. While a single "2021" specific manual may not be publicly labeled as such, the technical documentation for the A7 Plus series (which includes the 2021 models) covers critical service procedures. Core Service & Technical Manual Contents

| Instrument | Sterilization / Disinfection Method | | :--- | :--- | | | The grip and spout must be disinfected. The instrument is supplied non-sterile; use disposable protections. | | Turbine / Micromotor | Follow the specific instructions provided with the handpiece for disinfection and sterilization. | | Scaler | The torque wrench, bits, and handpiece can be steam-autoclaved up to 135°C. Do not soak in disinfectant liquids. | | T-LED Curing Light | The fiber optic and eye protection can be steam-autoclaved up to 135°C. The handpiece is not autoclavable; only disinfect the grip. | | C-U2 Dental Camera | Do not cold sterilize by soaking in solutions. The handpiece must be disinfected before being shipped for repair. | | Suction Tubes | Tube holder terminals can be steam-autoclaved up to 135°C. Suction tubes themselves must be cold-sterilized at temperatures not exceeding 55°C. |

Privacy Preference Center