Dump-enie-tv-led-lcd-smart-by.imed36.rar Jun 2026

Open the plastic back casing of the ENIE television. Locate the (printed directly onto the green or black PCB silkscreen, e.g., TP.MS338.PB801). Confirm that the microchip layout matches the specifications expected by the IMED36 file dump. Locate the SPI Flash chip—usually an 8-pin IC labeled under the 25Qxx series (such as Winbond 25Q32 or 25Q64). Step 2: Extracting the Dump File

An EEPROM/Flash Programmer (e.g., RT809F, RT809H, or CH341A). A soldering iron or test clips to connect to the IC chip. A computer with software for the programmer. WinRAR/7-Zip to extract the file. How to Use DUMP-ENIE-TV-LED-LCD-SMART-BY.IMED36.rar Step 1: Download and Extract DUMP-ENIE-TV-LED-LCD-SMART-BY.IMED36.rar

Any user who opens the .rar file on their personal computer (PC) to "investigate" the firmware dump is at immediate and extreme risk. Open the plastic back casing of the ENIE television

Download the archive and extract it using a file extractor. Inside, you will find a .bin or .hex file. Verify that the file size perfectly matches the capacity of your TV's flash chip (common sizes are 4MB, 8MB, or 16MB). Step 2: Locate the Flash IC Locate the SPI Flash chip—usually an 8-pin IC

Here’s a dump of the original firmware from an Enie-branded LED LCD Smart TV (board IMED36).

: Usually an SPI Flash (8-pin chip) or an eMMC chip located on the mainboard.

Method 2: Hardware Programmer Method (For Completely Dead/Bricked TVs)