You likely turned the meter on before clicking "Start" in the software. Power off the meter, click Start on the PC, and then flip the meter switch on. Progress Bar Stalls at 0%
This often happens if the battery died during the update. In some cases, recharging it for 24 hours can revive it. satlink ws 6933 software update work
This means the firmware file was corrupted or incorrect for your hardware revision. Don't panic—the bootloader is usually still intact. Repeat the update process using an older, verified stock firmware file to revive the device. 📡 Step 4: Post-Update Verification You likely turned the meter on before clicking
You’ll need the SatlinkTools application or similar flashing software. click Start on the PC
: Firmware updates eliminate firmware bugs, system lockups, and unoptimized battery drainage cycles.